Suitable for
To be used in interior spaces, where we want to create the appearance of a fine surface with a slight relief.Steps
JUBOLIN P 50 extra fine 0-3
ACRYL Emulsion (diluted with water in a ratio of 1:1)
2x layer DECOR Marmorin
1x layer DECOR Marmorin shine
System description
The EGEO technique helps us create the appearance of a fine surface, with a slightly gentle relief, which gives the surface a more pronounced pattern under a certain angle of observation or incidence of light. The barely visible pattern structure seems discrete yet very noble like the Egeo natural marble. When applying the ordinary EGEO technique, use one shade of DECOR Marmorin, while the more demanding application consists of several different shades of DECOR Marmorin, which together form the final aesthetical appearance.Recommended shades of technique
System composition
JUBOLIN P 50 extra fine 0-3
ACRYL Emulsion
DECOR Marmorin
DECOR Marmorin shine
Technique instructions
1. Pre-painting: the surface should be dry, solid and without any oil stains and similar impurities.
2. Smoothing the surface: smooth the surfaces with JUBOLIN P 50 extra fine 0-3 in the total thickness of 3 mm.
3. Sanding the surface: sand the dried coat and clean the dust.
4. Impregnation: apply ACRYL Emulsion diluted with water in a ratio of 1:1 onto the dried coat of JUBOLIN P 50 extra fine 0-3.
5. Apply DECOR Marmorin in thickness of ~0.1-0.5 mm with a stainless smoothing trowel. The width of the application should be approximately 0.5-1 m2, or so that the application is smoothed to the appropriate thickness before drying. The length of a stroke made with a smoothing trowel should be 20-30 cm. There are hardly any edges which would remain when drawing the smoothing trowel as they are simultaneously smoothed. When the first coat is dried through, apply the second one which should resemble the first one.
6. Manufacture of the structure:
a. Cover a clean stainless smoothing trowel with a thin coat of DECOR Marmorin. The thickness of DECOR Marmorin on the smoothing trowel is ~0.5 mm. Place the smoothing trowel gently and flat on the surface. With circular strokes, Marmorin, which has been applied to the smoothing trowel, is transferred slowly onto the surface in the form of irregular spots. While doing this, do not press and smooth too hard.
b. When the surface is dried through, gently remove individual tips with a stainless smoothing trowel. This can also be done with fine sandpaper (granulation of 200-300); while doing this, we should be careful not to smooth the surface. Clean the dust.
c. Apply two coats of DECOR Marmorin shine with a synthetic cloth. When the final application is dried through, polish the surface with a clean synthetic cloth. Do not smooth DECOR Marmorin before applying DECOR Marmorin Shine, so the final appearance is a semi-gloss surface.
Tools
- Roller
- Stainless spatula
- Stainless rounded trowel
- Synthetic fabric - polypropylene
Advantages and beneits for investitors
- A wide selection of exclusive shades
- Attractive and modern appearance
- Expressing individuality/creativity