Suitable for
To be used in interior spaces, where we want to create the appearance of noble rust.System description
Sophistically captured in the DECOR techniques, nature creates a noble and unique appearance of a home. By play, imagination and the choice of the right tool and shades, top-quality works of art created with the DECOR products give the home a unique touch.Recommended shades of technique
JUPOL Gold 110A
JUBIN Metal 6407
JUPOL Gold 090A
JUBIN Metal 6508
JUPOL Gold 060A
JUBIN Metal 6410
JUPOL Gold 040A
JUBIN Metal 6203
JUPOL Gold 010B
JUBIN Metal 6106
System composition
JUBOLIN P 50 extra fine 0-3
ACRYL Emulsion
DECOR Marmorin 020A
DECOR Marmorin 820C
JUBIN Metal 6408
DECOR Marmorin 290A
Technique instructions
1. Pre-painting: the surface should be dry, solid, without any oil stains and similar impurities. Ensure colour equality of the surface. If necessary, undercoat it to obtain a uniform colour tone of the surface. Use JUPOL Gold (020A).
2. Smoothing the surface: with JUBOLIN P 50 extra fine 0-3 with a stainless smoothing trowel.
3. Sanding the surface: dedusting of particles by hoovering or a fine brush.
4. Impregnation: with ACRYL Emulsion (1:1 ).
5. Manufacture of the structure
a. Coat the surface with DECOR Marmorin (020A) in a thin coat (in thickness of ~ 0.5 mm) using a clean, stainless smoothing trowel. Place the smoothing trowel gently and flat on the surface. With circular strokes, DECOR Marmorin, which has been applied to the smoothing trowel, spills slowly onto the surface in the form of irregular spots. While doing this, do not press and smooth.
b. Distribute the freshly applied (wet) DECOR Marmorin with a small (10 cm) foam structural roller across the surface with vertical and horizontal strokes.
c. This is immediately followed by an additional application of DECOR Marmorin 020A with a large (18 cm) foam structural roller. Distribute the application with vertical and horizontal strokes across the entire surface. After 10 to 15 minutes, repeat the procedure with DECOR Marmorin (820 C).
d. After 2 to 4 hours, apply JUBIN Metal (6408) to the surface with a small and large roller, taking care that the applied layer is not topcoat, but translucently mottled.
e. Apply the last coat of DECOR Marmorin (290 A) with a small and large structural roller, so that no traces of the roller can be seen. The amount of the application depends on the desired intensity of the appearance of rust.
Tools
- Stainless trowel
- Stainless spatula
- Foam structural roller
- Roller
- Sprayer
Advantages and beneits for investitors
- A wide selection of exclusive shades
- Attractive and modern appearance
- Expressing individuality/creativity