0
Home / System solutions - PROFI / DECOR Travertino Decoral

System solution

DECOR Travertino Decoral

Natural elegance with a stone look

icon
Suitable for
use in interior rooms with characteristic brick relief patterns.

Steps

1
1. step (Surface preparation)

1x layer DECOR Decoral

2
2. step (First layer)

1x layer DECOR antique in selected shade (diluted with 10% water)

3
3. step (Final decorative layer)

1x layer DECOR antique in selected shade (diluted with 5% water)

System description
A decorative technique that mimics the texture of natural limestone and adds a rustic yet sophisticated look to the room. With characteristic relief patterns, it creates a feeling of warmth and timeless elegance, suitable for classic and modern ambiences.
Recommended shades of technique
DECOR Travertino decoral_160F Family 330.jpg
DECOR Antique 160F
DECOR Travertino decoral_Antique 050A Success 125.jpg
DECOR Antique 050A
DECOR Travertino decoral_Antique 230B Beauty 10.jpg
DECOR Antique 230B
DECOR Travertino decoral_Antique 290E Beauty 205.jpg
DECOR Antique 290E
DECOR Travertino decoral_Antique 300E Beauty 235.jpg
DECOR Antique 300E
DECOR Travertino decoral_Antique 370B Beauty 430.jpg
DECOR Antique 370B
System composition

DECOR Decoral
DECOR Antique

Technique instructions

Surface Preparation:

  1. The surface should be slightly rough, dry, and clean, free from loosely bonded particles, dust, water-soluble salts, greasy coatings, and other impurities.

Application Technique:

  1. Prepare the mixture by mixing a bag of DECOR Decoral with 4.7 to 5.3 litres of water. After 10 minutes, stir the mixture again and add more water if necessary.
  2. Using a trowel, apply the mixture to the surface (covering an area of 6 m²) in a thickness equal to the largest grain size in the mixture.
  3. While the mixture is still fresh, use a decorative brush to create the appearance of small holes, ensuring that no more than 1/3 of the entire surface is affected. This should be done in horizontal wavy strokes. Then, gently roll the entire surface with a DECOR Travertin roller.
  4. Once the material has partially “tightened,” smooth it with a stainless steel trowel, making sure not to fill in the holes too much.
  5. When the surface is dry to the touch but still soft, use a “scoring” technique to create a stone block pattern in the DECOR Decoral surface. Use a straight edge and scoring tool to make vertical and horizontal lines.
  6. Carefully and gently smooth the surface with a stainless steel trowel. Deepen and refine the pattern’s scores.
  7. Apply DECOR Antique with a wide brush in the desired shade. For the first coat, dilute it with water up to 10%; for the second coat, dilute it up to 5%.
Advantages and beneits for investitors
  • Atractive and modern look
  • Expressing creativity